Technical advice

More about concrete

Concrete repair for damaged concrete

Concrete repair with Penetron: identify the cause first, then remove loose concrete and restore the surface in layers with crystalline mortars.

Close-up of Penetron products

Successful concrete repair always starts with a thorough analysis of the damage. Only once the cause is known can you intervene in a targeted and effective way.

  • Investigate the cause of the damage, such as frost, corrosion, cracks or chemical attack.
  • Remove loose and deteriorated concrete down to a sound, stable substrate.
  • Clean the reinforcement thoroughly and treat it with an anti-corrosion primer if necessary.
  • Apply the repair mortar carefully in layers, following the product specifications.
  • If required, finish the repaired surface with a protective coating or impregnating agent to prevent new damage.

Concrete repair products

Depending on the nature and extent of the damage, you can choose from several product types. Cement-based repair mortars are ideal for both structural and cosmetic repairs. For cracks or voids, an injection system can offer the solution. Anti-corrosion primers are used for extra protection of the reinforcement. Finally, coatings or impregnating agents can protect the concrete against new deterioration over the long term. The choice of product always depends on factors such as the location, the load, the humidity and the condition of the existing concrete.

Concrete repair duration

The duration of concrete repairs varies per project. Small, cosmetic repairs can often be completed within one day. Larger structural repairs take more time, depending on the preparation, the scale of the work and the drying or curing time of the products used. Rapid-curing repair mortars can shorten the total repair time considerably, so that tight schedules remain feasible.

Concrete repair cost

The price of concrete repair depends heavily on the situation, but you should generally expect an amount between €50 and €150 per m². An accurate price calculation is always tailor-made and requires a site visit or an analysis based on photos or plans.

Factors that affect the cost:

  • The nature and severity of the damage
  • The accessibility of the repair area
  • Required safety measures
  • Standard or high-performance products
  • Any finishing and aftercare

Concrete without loss of strength

It is important to use only repair mortars that have at least the same compressive strength as the original concrete. This preserves the strength of the structure. Also ensure good bonding between the existing and new concrete, for example with a bonding layer, primer or prior wetting. Allow the concrete to cure sufficiently and correctly, taking the temperature and air humidity into account. For structural repairs, it is advisable to also consult an engineer for an extra check of the strength calculations.

Questions

How do you repair damaged concrete?

Penetron Benelux first analyses the damage, then removes loose concrete and repairs the surface in layers with suitable mortars and protection.

Which products do you use for concrete repair?

Repair mortars, injections, corrosion-inhibiting primers and protective coatings, depending on the damage and the application.

How long does concrete repair take?

Small repairs usually take 1 day; structural repairs take a few days, depending on the extent of the damage and the curing time.

What does concrete repair cost per m²?

On average between €50 and €150 per m², depending on the damage, the level of difficulty, the choice of product and accessibility.

How do you maintain strength during concrete repair?

Penetron Benelux uses repair mortars with sufficient compressive strength and ensures good bonding and correct curing in accordance with the specifications.

Contact

Discover how Penetron can strengthen your next construction project

Tell us about your project. We will help you choose the right product.

Request technical advice