- Home
- Products
- Repair & restoration
- Penetron Grout
Repair & restoration · Non-shrinking, non-corrosive cementitious joint mortar
Penetron Grout
Non-shrinking cementitious grout, voids & anchors
Non-shrink, non-corrosive cement-based grout with controlled expansion, for anchoring and concrete repair. The product must be placed in a suitable form: the formwork must be strong, anchored, braced and sealed. For a thickness of more than 50 mm, add 9.5 mm quartz aggregate, up to 50 per cent by weight.
- On existing concrete
How much do I need?
Yield about 12 litres per 22.7 kg bag, about 17 to 18 litres with aggregates at a thickness above 5 cm. Enter the volume to fill. The yield of the 25 kg bag is not in the data sheet; the knowledge base flags this for checking.
Description
What is Penetron Grout?
PENETRON GROUT is an industrial grout with high strength and fluidity, ready to use, with exclusive protection through crystallization. It is effective in extremely fluid consistencies and does not need to be contained to develop its full strength. It consists of Portland cement, silica sand and special additives.
PENETRON GROUT is part of the PENETRON system in the concrete surface preparation phase. It is used to treat and repair walls with PENETRON ADMIX®. In addition, it is used for concreting pipes into walls with PENETRON ADMIX®.

Applications
What do you use Penetron Grout for?
- Structural repairs requiring high flowability, high mechanical strength and compatibility with structural concrete, as well as protection of the steel.
Technical data
From the technical data sheet
Technical data
From the Penetron technical data sheet, with the source.
- Short description
-
PENETRON® GROUT is a ready-to-use, expansion-controlled, non-shrink, non-corrosive, cement-based, high strength grout for concrete repairing and anchoring.
Technical data sheet - Layer thickness
-
For thickness, over 5 cm (2”) add 50% of clean, washed, dry 9,5 mm (3/8”) quartz aggregates
Technical data sheet
On request: Drinking water. We will gladly confirm those details to you personally: get in touch with Penetron Benelux.
Frequently asked questions
What customers ask us about Penetron Grout
What is Penetron Grout?
Penetron Grout is a cementitious grout with high flowability and strength and crystalline protection. Exact use follows the data sheet and the project specification.
When is a non-shrink grout used?
A grout is used where a flowable cementitious fill with suitable mechanical properties is required. Have the suitability for a specific grouting or anchoring application assessed.
What is Penetron Grout used for?
Penetron Grout is a non-shrink, non-corrosive, cement-based pourable grout with controlled expansion, for anchoring and concrete repair.
How is Penetron Grout applied?
The product must be placed in a purpose-made form. The formwork must be strong, anchored, braced and sealed.
What is required for a thickness of more than 50 mm?
For a thickness of more than 50 mm, add 9.5 mm quartz aggregate, up to 50% by weight.
Your question not listed?The digital assistant answers immediately, day and night, with Penetron Benelux data.
The chat opens at the bottom right with your question.
For example
The Penetron Benelux digital assistant (AI) can make mistakes. Check important data in the technical data sheet.
Related products
Other products in this category
Discuss your project with an adviser
Call, email or use the contact form and get advice on the right product, for new and existing concrete.



