- Home
- Products
- Repair & restoration
- Penetron Quick Patch
Repair & restoration · High-speed repair mortar for horizontal applications
Penetron Quick Patch
Fast-curing repair mortar for horizontal surfaces
Pre-mixed, fast-curing cement-based repair mortar for horizontal concrete surfaces. Contains polymers and fibres for extra bond, tensile and flexural strength. High early strength, 14 MPa after 1 hour, so the surface can quickly return to service. Not for vertical surfaces, asphalt or latex-modified concrete.
- On existing concrete
How much do I need?
Yield about 12 litres (0.012 m³) per 22.7 kg bag. Enter the volume to repair; consumption depends on the project.
Description
What is Penetron Quick Patch?
Very fast curing mortar for repairs with minimal downtime. Ideally suited for critical applications such as roadways and industrial floors.
Benefits:
- Compressive strength >14 MPa after 1 hour
- Workable within 10 minutes
- Compatible with frost/thaw and thaw salts
- Can be extended with gravel for thicker layers

Applications
What do you use Penetron Quick Patch for?
- Ramps, bridge decks, roads
- Cold stores, factory floors, airports
- Urgent repairs where the concrete must be returned to service quickly
Technical data
From the technical data sheet
Technical data
From the Penetron technical data sheet, with the source.
- Short description
-
PENETRON® QUICK PATCH is a quick-setting, cementitious compound used for areas where fast repairs are necessary and the concrete must be put back in service promptly.
Technical data sheet - Layer thickness
-
It can be used for repairs from full thickness down to 13 mm (½’’) thickness. | Applications over 51 mm (2’’) thickness must be extended by pea gravel addition (see Mixing).
Technical data sheet
On request: Drinking water. We will gladly confirm those details to you personally: get in touch with Penetron Benelux.
Frequently asked questions
What customers ask us about Penetron Quick Patch
What is Penetron Quick Patch used for?
Quick Patch is a fast-hardening mortar for horizontal concrete repairs, including roads and industrial floors.
Which substrates is Penetron Quick Patch not intended for?
Penetron Quick Patch is not intended for vertical surfaces, asphalt or latex-modified concrete.
How soon can Penetron Quick Patch be loaded again?
The data sheet states approximately 14 MPa after 1 hour under test conditions. That is not an automatic release for traffic: the required strength and the actual conditions determine when it can be put back into use.
What is the yield per bag of Penetron Quick Patch?
The Benelux data sheet states approximately 0.012 m³ of mortar per 22.7 kg bag, at the prescribed amount of water. Adding aggregate changes the yield and follows a separate instruction.
Which concrete repair products does Penetron offer?
The Benelux range includes Penetron Quick Patch, V/O Patch, CR-90, Surfix Hi-Build and Grout, among others. Their fields of application differ. Choosing a product for specific damage requires technical advice.
Your question not listed?The digital assistant answers immediately, day and night, with Penetron Benelux data.
The chat opens at the bottom right with your question.
For example
The Penetron Benelux digital assistant (AI) can make mistakes. Check important data in the technical data sheet.
Related products
Other products in this category
Discuss your project with an adviser
Call, email or use the contact form and get advice on the right product, for new and existing concrete.


