- Home
- Products
- Waterproofing
- Penecrete Mortar
Waterproofing · Crystalline repair mortar for cracks and joints
Penecrete Mortar
Crystalline repair mortar, always used together with Penetron Slurry
Crystalline repair mortar made of portland cement, treated silica sand and active chemicals, always used together with Penetron Slurry. For sealing strips and coving at joints, connection holes, milled cracks and gravel nests. Not recommended for expansion joints or other joints that must allow movement. Do not apply below 4°C, do not apply to a frozen substrate and do not apply if frost is expected during the curing period of approximately 24 hours.
- Crystalline
- On existing concrete
- Used in 27 projects
How much do I need?
Crack or reglet: 1.6 kg per linear metre. Surface or cavity: 2.5 kg per litre of cavity volume. One cubic metre is a thousand litres.
Description
What is Penecrete Mortar?
Used in combination with PENETRON to fill non-moving cracks and structural joints, connection holes, gravel nest areas and structurally damaged concrete. PENECRETE MORTAR consists of portland cement, very finely treated silica sand and various active, patented chemicals. It is applied in laminated layers to areas that have been opened and cut back to healthy concrete for repair, to provide protection against water intrusion.

Applications
What do you use Penecrete Mortar for?
- Applied in combination with PENETRON® for:
- Installation of sealing strips, reglets and chases at joints to ensure watertightness
- Repair of tie holes and defective construction joints
- Repairing and filling routed cracks
- Repairing spalled and honeycombed areas
Technical data
From the technical data sheet
Technical data
From the Penetron technical data sheet, with the source.
- Short description
-
PENECRETE MORTAR™ consists of Portland cement, specially treated quartz sand and a compound of active chemicals.
Technical data sheet
On request: Drinking water. We will gladly confirm those details to you personally: get in touch with Penetron Benelux.
In practice
See how it works on site
Frequently asked questions
What customers ask us about Penecrete Mortar
What is Penecrete Mortar used for?
Penecrete Mortar is a crystalline mortar for non-moving cracks, construction joints, form tie holes and local concrete defects, among other things, used together with Penetron.
Is Penecrete Mortar always used together with Penetron?
The technical data sheet describes application with Penetron as a pre-treatment and as a subsequent surface treatment. Follow the complete system specification.
Can Penecrete Mortar be used for form tie holes?
Yes. Form tie holes are listed among the applications of Penecrete Mortar. Follow the product-specific preparation and application from the technical data sheet.
What is the consumption of Penecrete Mortar?
For a 25 × 25 mm groove, Penetron Benelux uses 1.6 kg per linear metre. This is a Benelux calculation value; the quantity is indicative and depends on the actual profile.
What is the difference between Peneplug and Penecrete Mortar?
Penecrete Mortar is a mortar for detail and filling work within the system. Peneplug is the fast-setting mortar for leak-stopping applications. For specific problems, we will refer you on.
Your question not listed?The digital assistant answers immediately, day and night, with Penetron Benelux data.
The chat opens at the bottom right with your question.
For example
The Penetron Benelux digital assistant (AI) can make mistakes. Check important data in the technical data sheet.
Related products
Other products in this category
Discuss your project with an adviser
Call, email or use the contact form and get advice on the right product, for new and existing concrete.






