- Home
- Products
- Waterproofing
- Peneplug
Waterproofing · Fast-curing cement mortar for sealing active leaks
Peneplug
Sets about 30 seconds after mixing
Fast-setting, integral crystallizing cementitious waterproofing material that stops active water leaks and moisture ingress, inside and outside. Knead the mix into a wedge, press it into the leak and hold it firmly in place for about 30 seconds until it has set. Also for leaking joints, tie holes and cracks. Then finish the repair: a bonding coat of Penetron Slurry, fill the remaining cavity up to surface level with Penecrete Mortar and, after light pre-wetting, apply a final coat of Penetron Slurry.
- On existing concrete
- Used in 6 projects
How much do I need?
Snelbindende stopmortel. De fiche geeft geen rendement; gerekend met ongeveer 1,9 kg per liter holte: ongeveer 9,5 liter per zak van 18 kg en 13 liter per emmer van 25 kg. Mengverhouding ongeveer 0,25 liter water per 1,1 kg poeder.
Description
What is Peneplug?
A rapidly setting, crystallizing, cementitious compound designed to stop active leaks, even under high hydrostatic pressure. PENEPLUG is recommended as a watertight sealing mortar or where rapid curing is required.

Applications
What do you use Peneplug for?
- Concrete
- Masonry
- Earthenware
- Stone
Technical data
From the technical data sheet
Technical data
From the Penetron technical data sheet, with the source.
- Short description
-
PENEPLUG® is a rapid setting, integral crystalline cementitious waterstop designed to stop active water leaks and moisture ingress.
Technical data sheet
On request: Drinking water. We will gladly confirm those details to you personally: get in touch with Penetron Benelux.
In practice
See how it works on site
Frequently asked questions
What customers ask us about Peneplug
What is Peneplug?
Peneplug is a fast-setting, crystalline-based cementitious mortar developed for stopping active water leaks. A technical adviser at Penetron Benelux assesses a specific leak.
When is Peneplug used?
The product page mentions stopping active leaks and applications that require fast setting. For a specific leak: contact a technical adviser at Penetron Benelux.
Can Peneplug be used under hydrostatic pressure?
The product description mentions use on active leaks under hydrostatic pressure. This is not a confirmation of suitability for a specific leak.
How is Peneplug applied in a leak?
The mix is kneaded into a wedge, pressed into the leak and held firmly in place until it has hardened. This can also be done for leaking joints, tie holes and cracks.
How is the repair finished after sealing with Peneplug?
The repair is finished with a bonding coat of Penetron Slurry. The remaining cavity is then filled up to the level of the surface with Penecrete Mortar, and after light pre-wetting a final coat of Penetron Slurry follows.
Your question not listed?The digital assistant answers immediately, day and night, with Penetron Benelux data.
The chat opens at the bottom right with your question.
For example
The Penetron Benelux digital assistant (AI) can make mistakes. Check important data in the technical data sheet.
Related products
Other products in this category
WaterproofingPenetron SlurryCrystalline slurry, applied by brush or spray
View product
WaterproofingPenecrete MortarCrystalline repair mortar, always used together with Penetron Slurry
View product
WaterproofingPenecryl ElasticLiquid plasticizer and adhesion enhancer for cementitious mortars
View product
Discuss your project with an adviser
Call, email or use the contact form and get advice on the right product, for new and existing concrete.


