Technical advice
Burrows Road Tunnel

Referentie, energie

Burrows Road Tunnel

LocatieSydney, New South Wales, Australia
ApplicationEnergie
ProductsPenetron Admix, Penecrete Mortar, Peneplug

The Burrows Road Tunnel is a watertight tunnel that carries six 132 kV cable circuits under Burrows Road in the Alexandria industrial area of central Sydney. The tunnel is 87 metres (285 feet) long and has a diameter of 2.8 metres (9 feet). Dug into fully saturated (and contaminated) soil, the construction of this trenchless watertight tunnel required an on-site water collection and drainage system. The launch and reception pits were sunk eight metres into the contaminated soil.

The client was network operator Ausgrid, and the tunnel is part of the network from the nearby Beaconsfield South substation. Abergeldie built it trenchlessly using the pipe-jacking method and an EPB boring machine. A total of 28 segments, each 410 mm thick, were jacked through the ground, and the boring itself took ten days.

Engineering consultant Demlakian and Abergeldie chose the Penetron system in consultation with Penetron Australia. The pits were designed to serve later as access for the maintenance of the tunnel.

Solutions applied

Penetron Admix was used for all concrete elements in both the launch pit and the reception pit to provide protection against water infiltration under the extreme conditions on site. All construction joints and pipe penetrations within the pits were sealed with Penebar SW waterproofing strips. The shaped connection holes were filled with Peneplug and Penecrete Mortar.

Discuss your project with an adviser

Call, email or use the contact form and get advice on the right product, for new and existing concrete.

Request technical advice