- Home
- Products
- Joint sealing & waterstops
- Penebar SW-55
Joint sealing & waterstops · Waterstop for concrete joints
Penebar SW-55
Standard swellable strip, most widely used
Bentonite-enriched butyl rubber waterstop that expands in a controlled way on contact with water, forming a seal within and against the concrete. For non-moving concrete construction joints only, horizontal and vertical, on new or existing concrete and around penetrations such as pipes, service lines, piles and steel beams. Do not apply in standing water or on a frozen or icy substrate. Always install with Penebar Primer.
- During pouring
- Used in 23 projects
How much do I need?
One metre of strip per metre of joint. Type A: 30 m per carton, type B: 24 m per carton. Primer: 240 m per 3.8 litre can.
Description
What is Penebar SW-55?
PENEBAR SW 55 creates a physical barrier against water ingress through cast-in-place concrete joints by expanding (in a controlled way) when exposed to water. Thanks to its superior ability to expand and seal concrete joints, it can replace the more passive, tied PVC waterstop systems, which bend over easily during pouring, and eliminate the need for welding irons, split-forming and special shapes.

Applications
What do you use Penebar SW-55 for?
- Underground structures
- Basements
- Precast panels
- Tunnels
- Manholes
- Lift pits
- Retaining walls
- Concrete pipes
- Storage tanks
Technical data
From the technical data sheet
Technical data
From the Penetron technical data sheet, with the source.
- Short description
-
PENEBAR™ SW-55 is a bentonite infused butyl rubber waterstop developed to stop water penetration through cast-in-place concrete joints by expanding in a controlled fashion when exposed to water and making a positive seal inside and against the concrete.
Technical data sheet
On request: Drinking water. We will gladly confirm those details to you personally: get in touch with Penetron Benelux.
In practice
See how it works on site
Frequently asked questions
What customers ask us about Penebar SW-55
What is Penebar?
Penebar is a swelling waterstop for non-moving concrete joints. On contact with water, the material expands and forms a seal in the surrounding concrete.
When is SW-55 used?
SW-55 is intended for non-moving concrete joints and pipe penetrations. Suitability depends on the substrate, the confinement and the project specification.
Where is Penebar placed in a construction joint?
The technical data sheet for Penebar SW-55 requires at least 50 mm of depth within the concrete and direct contact with the substrate along the entire length. Also follow the project-specific joint detail.
Is a primer necessary?
Yes. The technical data sheet for Penebar SW-55 prescribes Penebar Primer to support adhesion and positional stability during casting.
Can Penebar be combined with Penetron Admix?
Penebar treats the non-moving joint, while Penetron Admix is added to the concrete. Using system components together requires a coordinated detail design.
Your question not listed?The digital assistant answers immediately, day and night, with Penetron Benelux data.
The chat opens at the bottom right with your question.
For example
The Penetron Benelux digital assistant (AI) can make mistakes. Check important data in the technical data sheet.
Related products
Other products in this category
Discuss your project with an adviser
Call, email or use the contact form and get advice on the right product, for new and existing concrete.




