Technical advice
  1. Home
  2. Products
  3. Joint sealing & waterstops
  4. Penebar Primer

Joint sealing & waterstops · Adhesive for the Penebar waterstops

Penebar Primer

Mandatory auxiliary product for all Penebar waterstops

Primer that is always applied before installing Penebar SW-55 or SW-45 Rapid. Improves adhesion between the preformed joint sealant and the concrete. Apply with a brush in a strip at least 50 mm wide and at least 0.1 mm thick. Drying takes 10 to 15 minutes at 25 degrees and 60 minutes at 4 degrees, the minimum application temperature. Install the strip while the primer is still tacky and within 3 hours of the primer drying; after that, prime again.

Frequently asked questions

What customers ask us about Penebar Primer

What is Penebar Primer used for?

Penebar Primer improves the adhesion of the preformed waterstop to the substrate and helps with its placement.

When must Penebar Primer be used?

Penebar Primer is a mandatory auxiliary product for all Penebar waterstops. It is always applied before Penebar SW-55 or SW-45 Rapid is placed.

How is Penebar Primer applied?

Penebar Primer is applied with a brush in a strip at least 50 mm wide and at least 0.1 mm thick.

What is the minimum application temperature of Penebar Primer?

The minimum application temperature of Penebar Primer is 4 degrees.

How much joint length does one can of Penebar Primer cover?

A 3.8 litre (1 gallon) can covers 240 m of joint. This is a calculation, not advice. A technical adviser at Penetron Benelux will confirm which coverage suits your project.

Your question not listed?The digital assistant answers immediately, day and night, with Penetron Benelux data.

For example

The Penetron Benelux digital assistant (AI) can make mistakes. Check important data in the technical data sheet.

Two people in high-visibility vests and helmets in the warehouse with Penetron products

Discuss your project with an adviser

Call, email or use the contact form and get advice on the right product, for new and existing concrete.

Request technical advice