- Home
- Products
- Waterproofing
- Penetron Seal Coat
Waterproofing · Cement-based waterproof coating for masonry and concrete
Penetron Seal Coat
Cement-based waterproof coating for masonry and concrete
Waterproof, cement-based coating for concrete, block, brick and stone, indoors and outdoors, above or below ground level. Hides mortar joints and gives a uniform, smooth surface. Apply with a short-bristle brush, second coat after 2 hours. Dries in 3 to 4 hours and cures within 24 hours to a hard, waterproof protective layer. Do not apply at temperatures below 4 degrees or on a frozen substrate. Not intended for negative side waterproofing where a head of water pressure is present and not recommended for use in joints or structures.
- On existing concrete
How much do I need?
The yield per 22.7 kg bag applies to the whole system in 2 coats: water only 9 m², with Acrylic Bondcrete 10 m², Flex 1:2 10 m² (estimate), Flex 2:1 10.5 m² and Elastic 14 m². With 3 coats it is two thirds. Per bag, add 2 kg of Acrylic Bondcrete, or 2, 4 or 12 kg of Penecryl Elastic. Source: PDS Seal Coat Systems from Penetron Hellas.
Description
What is Penetron Seal Coat?
A waterproof cement-based protective layer that blocks moisture and water. Can be used as a finish coat or base layer on interior and exterior walls.
Benefits:
- Uniform waterproof finish
- Adheres strongly to masonry and concrete
- Hides joints and imperfections
- Compatible with Penecryl Elastic for an elastic system

Applications
What do you use Penetron Seal Coat for?
- Basements, foundations, plant rooms
- Concrete blocks, brick, stone and other mineral substrates
- Interior and exterior walls, above or below ground level
Technical data
From the technical data sheet
Technical data
We will gladly confirm the technical data for this product to you personally: get in touch with Penetron Benelux. On request: Number of layers, Drinking water.
Frequently asked questions
What customers ask us about Penetron Seal Coat
What is Penetron Seal Coat?
Penetron Seal Coat is a cementitious waterproof coating for concrete and masonry. It is a different type of product from the crystalline Penetron surface treatment.
What is Penetron Seal Coat used for?
The data sheet describes a protective finish and levelling layer for suitable concrete and masonry surfaces, indoors and outdoors.
Which substrates can Penetron Seal Coat be applied to?
The data sheet lists concrete, blocks, brick and stone. Preparation and system build-up must be matched to the substrate and the loading.
How many coats of Penetron Seal Coat are needed?
For maximum watertightness, the data sheet describes two coats, with the second applied after the prescribed drying time. Follow the project specification and the technical data sheet.
What is the consumption per m²?
Consumption depends on the roughness and on whether it is the first or second coat. Use the table in the Penetron Seal Coat data sheet for the estimate, because a single uniform consumption is not correct for every substrate.
Your question not listed?The digital assistant answers immediately, day and night, with Penetron Benelux data.
The chat opens at the bottom right with your question.
For example
The Penetron Benelux digital assistant (AI) can make mistakes. Check important data in the technical data sheet.
Related products
Other products in this category
WaterproofingPenetron SlurryCrystalline slurry, applied by brush or spray
View product
WaterproofingPenecrete MortarCrystalline repair mortar, always used together with Penetron Slurry
View product
WaterproofingPenecryl ElasticLiquid plasticizer and adhesion enhancer for cementitious mortars
View product
Discuss your project with an adviser
Call, email or use the contact form and get advice on the right product, for new and existing concrete.
