- Home
- Products
- Waterproofing
- Penetron Slurry
Waterproofing · Crystalline waterproofing in slurry form
Penetron Slurry
Crystalline slurry, applied by brush or spray
Cement-based crystalline slurry, applied to damp concrete by brush or spray machine. It penetrates deep into the capillary channels and forms insoluble crystals, from the positive or the negative side. It is not a coating or a membrane, and it must not be added to concrete or plaster as an admixture; Penetron Admix is intended for that. Do not apply when the temperature reaches or drops below freezing point, and do not apply to frozen surfaces.
- Crystalline
- On existing concrete
- Used in 42 projects
How much do I need?
Consumption: vertical two coats (2 x 0.7 kg/m² = 1.4 kg/m²), horizontal one coat of 1.1 kg/m², construction joint 1.6 kg/m².
Description
What is Penetron Slurry?
PENETRON, a surface-applied, integral crystalline waterproofing material, is used for waterproofing and chemical protection both above and below the ground. PENETRON is applied with a brush or spray to the positive or negative side of the concrete and penetrates deep into the structure in the presence of moisture. The subsequent chemical reaction fills microcracks, pores and capillaries with an insoluble crystalline formation, preventing water and water-based chemicals from entering, even under high hydrostatic pressure. Even after the concrete has cured, PENETRON remains present in it in a dormant state and is reactivated in the presence of moisture to seal capillary channels and hairline cracks, resulting in permanent concrete protection.

Applications
What do you use Penetron Slurry for?
- Basement retaining walls
- Car parks
- Concrete slabs (floor, roof, balcony, etc.)
- Tunnels and metro networks
- Construction joints
- Foundations
- Water-holding structures
- Underground vaults
- Swimming pools
- Sewage and water treatment plants
- Channels
- Reservoirs and tanks
- Bridges, dams and roads
Technical data
From the technical data sheet
Technical data
From the Penetron technical data sheet, with the source.
- Short description
-
PENETRON® is a surface-applied, integral crystalline waterproofing material, which waterproofs and protects concrete in-depth.
Technical data sheet - Negative side
-
Can be applied from either the positive or negative side
Technical data sheet - Number of layers
-
Vertical surfaces: Two coats of PENETRON® at 1.25-1.5 lb/yd2 (0.7-0.8 kg/m2) applied by brush or spray. | Horizontal flatwork: PENETRON® at 2 lb/yd2 (1.1 kg/m2) applied in one slurry coat to hardened concrete. | When two coats are specified, apply the second coat while the first coat is still “green.”
Technical data sheet - Self-healing
-
Even after the concrete has cured, PENETRON® remains dormant in the concrete and will reactivate in the presence of moisture to seal capillary tracts and hairline cracks.
Technical data sheet - Crack width
-
Seals hairline and shrinkage cracks up to 1/51” (0.5 mm)
Technical data sheet - Chemical resistance
-
Resists chemical attack (pH 3-11 constant contact, pH 2-12 intermittent contact) and provides a range of protection from freeze/thaw cycles, aggressive subsoil waters, seawater, carbonates, chlorides, sulfates and nitrates | In addition to waterproofing the structure, PENETRON® protects concrete against sea- water, wastewater, aggressive groundwater and many other aggressive chemical solutions. | Resistance to Severe Chemical attack: Class II < 50% reduction in hardness
Technical data sheet
On request: Drinking water. We will gladly confirm those details to you personally: get in touch with Penetron Benelux.
In practice
See how it works on site
Frequently asked questions
What customers ask us about Penetron Slurry
What is Penetron?
Penetron is a cementitious crystalline surface treatment for concrete. Its active ingredients react with moisture and cement hydration products and form crystals in pores and capillaries.
How does Penetron make concrete waterproof?
Penetron limits water ingress through crystal formation in the capillary structure. According to the technical data sheet, the concrete remains permeable to water vapour.
What is the difference between crystalline waterproofing and a membrane?
A membrane forms a separate water-resistant layer. Crystalline waterproofing works within the concrete. Omitting a membrane requires a project assessment.
What is the difference between crystalline waterproofing and a hydrophobic impregnation?
Crystalline waterproofing is applied to limit water ingress, including under pressure. Compatibility with a specific hydrophobic impregnation or admixture must be assessed separately.
Can the crystalline action be reactivated later?
Yes. The technical data sheet describes how the active ingredients can react again on renewed contact with moisture and seal capillaries and hairline cracks.
Your question not listed?The digital assistant answers immediately, day and night, with Penetron Benelux data.
The chat opens at the bottom right with your question.
For example
The Penetron Benelux digital assistant (AI) can make mistakes. Check important data in the technical data sheet.
Related products
Other products in this category
Discuss your project with an adviser
Call, email or use the contact form and get advice on the right product, for new and existing concrete.






