Application
Hardening and protecting a concrete floor
A concrete floor in a warehouse or factory must stay hard and must not dust. Penetron offers hardeners that react within the concrete, and crystalline products for concrete slabs that also need to be waterproof.

An industrial concrete floor takes traffic every day, and that wears the surface. A hardener penetrates the concrete and makes the surface harder and dust-free, without a layer on top. If the slab also has to hold back water, crystalline protection is added, either in the concrete mix or on the surface.
What a hardener does in a concrete floor
Peneseal FH is a clear liquid that penetrates deep into the concrete and reacts with its constituents. Together they become a harder, denser mass. Salts and minerals that would otherwise effloresce are washed out during the process, and the surface no longer dusts.
The data sheet gives laboratory values: abrasion resistance increased by 80.9 per cent (ASTM C 779) and permeability decreased by 98.5 per cent at 100 psi (DIN EN 1928). These are results under laboratory conditions. On site they may differ somewhat.
Peneseal FH also works as a curing agent. It retains moisture, so the concrete cures more evenly, with fewer hairline cracks and thermal cracks. On steel-trowelled floors a natural, waxy sheen appears after 6 to 12 months. At the logistics centre of Solog in Bien Hoa, in Vietnam, 40,000 m² of floor was treated with Peneseal FH, so that the concrete is hardened and resistant to industrial traffic.
Polished floors and a gloss finish
For polished floors there is Peneseal FH-PS, based on polysilicate. It is ready to use and must not be diluted with water. It hardens and densifies the concrete and is suitable as the final finish of a polished floor. Please note: it is not a vapour barrier.
If you want a high gloss, apply Peneguard on top. This liquid seals the surface, so that water and stains have less hold on it. You buff after 30 to 60 minutes and apply no more than 3 coats. For the best result, Peneseal FH or FH-PS goes on first. Peneguard replaces waxing and polymer coatings.
Concrete slabs that must be waterproof
If a floor slab has to hold back water, the protection goes into the concrete. For a new slab this can be done with Penetron Admix in the mix. This is why Veemnatie in Antwerp chose Admix for a concrete slab of about 11,000 m², to avoid having to apply extra coatings or membranes.
On an existing slab you use Penetron Slurry: on horizontal surfaces in one thin coat, at a consumption of 1.1 kg/m² on cured concrete. In fresh concrete the slurry can also be dry-shaken, 1 kg/m², and worked in with a trowel as soon as the concrete starts to set.

Roofs, bridge decks and outdoor ramps
If the slab is outdoors, with large temperature differences, Peneseal Pro is the right choice. It is sprayed onto the concrete and forms a gel just below the surface that seals pores and hairline cracks. Cracks up to 0.5 mm are sealed. Let them fill first, using about 1 litre per 5 linear metres.
On the Bypass Noord of the Oosterweelverbinding in Antwerp, Peneseal Pro was sprayed onto bridge decks of about 450 m² each, before the asphalt layer was applied. This was followed by an aftertreatment with a water mist to activate the product.
Peneseal Pro is not intended to harden a floor: for that, the data sheet refers to Peneseal FH. It does not repair structural cracks either, and it does not hold back water pushing against the concrete from the other side. The concrete must be at least 14 days old, 28 days is better.
Repairing a damaged concrete floor
If the floor is already damaged, repair comes first. Penetron Quick Patch is a fast-setting repair mortar for horizontal surfaces that need to be back in use quickly, such as factory floors, cold stores and bridge decks. It is not suitable for vertical surfaces, asphalt or latex-modified concrete.
If the surface is worn or spalled, Penetron CR-90 makes it level again, up to a thickness of 13 mm. This levelling mortar is walkable after 2 hours and suitable for light traffic after 8 hours, at 21 °C. Cracks that do not move are filled with Penecrete Mortar and Penetron Slurry. You will find more on this under repair of existing concrete.
Questions
How do you make a concrete floor dust-free?
With a hardener such as Peneseal FH. It reacts with the constituents of the concrete and densifies the surface, so that it no longer dusts.
How do you make a concrete floor waterproof?
For a new slab, with Penetron Admix in the concrete mix. On an existing slab, with Penetron Slurry, in one thin coat on the cured concrete. Outdoors, on roofs and bridge decks, with Peneseal Pro.
How do you repair a crack in a concrete floor?
A crack that does not move is routed out and filled with Penecrete Mortar, together with Penetron Slurry. On outdoor slabs, Peneseal Pro seals hairline cracks up to 0.5 mm. If there is movement or structural damage, ask for advice first.
What is the difference between Peneseal FH and Peneseal Pro?
Peneseal FH is the hardener for floors in warehouses, hangars and factories, for example. Peneseal Pro is made for outdoor concrete exposed to large temperature differences, such as roofs and bridge decks. If the main aim is hardening, the technical data sheet for Peneseal Pro refers to Peneseal FH.
How do you protect concrete floors against wear and cracks?
A hardener such as Peneseal FH penetrates the concrete and makes the surface harder and dust-free. Peneseal FH also acts as a curing agent, so the concrete cures more evenly with fewer hairline cracks and thermal cracks. For structural damage, ask for advice first.
What are the best products for strengthening concrete floors?
To harden a concrete floor, there is Peneseal FH, a reactive hardener. For polished floors there is Peneseal FH-PS, which is polysilicate-based. If you want a high gloss, apply Peneguard on top.
What are the benefits of self-healing concrete for floors?
For a new concrete slab, the crystalline waterproofing can go straight into the mix with Penetron Admix: the concrete then seals hairline cracks by itself as soon as water gets in. Veemnatie in Antwerp chose this approach to avoid having to apply extra coatings or membranes.
Contact
Discover how Penetron can strengthen your next construction project
Tell us about your project. We will help you choose the right product.


