- Home
- Products
- Concrete injections
- Penetron Inject
Concrete injections · Injectable crystalline waterproofing for cracks and joints
Penetron Inject
Two-component crystalline injection mortar
Two-component injection mortar with integral crystalline waterproofing capability. Fills and seals cracks and fissures, fills cavities and voids and strengthens repaired zones. Mixing ratio for normal curing, open time approx. 2 hours: 25 kg part A with 2 l part B and 9 l water. For fast curing, open time 30 to 60 minutes: 25 kg part A with 1 l part B and 10 l water.
- On existing concrete
- Used in 3 projects
How much do I need?
Two-component injection grout. Per 25 kg pail of Part A: normal curing with 2 litres of Part B and 9 litres of water, fast curing with 1 litre of Part B and 10 litres of water. Enter the number of pails of Part A; the calculator works out the bottles of Part B and the mixing water.
Description
What is Penetron Inject?
PENETRON INJECT, an advanced crystalline-based two-component injection mortar with integral crystalline waterproofing, waterproofs concrete by filling and sealing deeply embedded cavities, cracks and fissures. It is used to fill voids and cavities and add stability and strength to repaired areas.
Due to the extremely fine particle size of the ingredients, PENETRON INJECT can penetrate microfine cracks, pores and capillaries in concrete and permanently seal them with an insoluble crystalline structure. It has a very low, aqueous viscosity so that the material can be injected into very fine cracks and displace any water present under injection pressure.

Applications
What do you use Penetron Inject for?
- Tunnels and metro systems
- Mines
- Foundations
- Water-retaining structures
- Underground vaults
- Sewage and water treatment plants
- Channels and reservoirs
- Bridges
- Basement retaining walls
- Car parks
- Construction joints
Technical data
From the technical data sheet
Technical data
From the Penetron technical data sheet, with the source.
- Short description
-
PENETRON INJECT™ is an advanced two-component water cut-off injection grout with integral crystalline waterproofing ability.
Technical data sheet - Packaging
-
PENETRON INJECT™ PART A (POWDER): 25-kg (55-lb) pails PENETRON INJECT™ PART B (LIQUID): 2-l (2-qt) jugs
Technical data sheet
On request: Drinking water. We will gladly confirm those details to you personally: get in touch with Penetron Benelux.
In practice
See how it works on site
Frequently asked questions
What customers ask us about Penetron Inject
What is Penetron Inject?
Penetron Inject is a two-component injection grout with crystalline action, intended for filling and sealing voids and cracks in concrete.
When is Penetron Inject used?
The manufacturer lists the filling and sealing of deeper voids and fine cracks. A technical adviser assesses the choice for a specific situation.
Which components does the system contain?
The product description mentions a two-component system. Use only the components and ratios given in the relevant data sheet.
How is Penetron Inject mixed?
The mixing procedure is product-specific and depends on the required set. Request the relevant technical data sheet and an application instruction from a technical adviser.
Does injection work have to be carried out by a specialist contractor?
For injection work, ask for technical advice and a suitable applicator. A technical adviser at Penetron Benelux determines the repair method for a specific crack or leak after assessment.
Your question not listed?The digital assistant answers immediately, day and night, with Penetron Benelux data.
The chat opens at the bottom right with your question.
For example
The Penetron Benelux digital assistant (AI) can make mistakes. Check important data in the technical data sheet.
Discuss your project with an adviser
Call, email or use the contact form and get advice on the right product, for new and existing concrete.

